[ldv-project] [PATCH] usb: gadget: amd5536udc: fix error handling in udc_pci_probe()

[Alexey Khoroshilov]

If a failure happens early in udc_pci_probe(), error handling code
just kfree(dev) and returns. The patch adds proper resource
deallocations in udc_pci_probe() itself,
since udc_pci_remove() is not suitabe to be called so early
in initialization process.

By the way, iounmap(dev->regs) is replaced by iounmap(dev->virt_addr)
in udc_pci_remove() for clarity.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov at ispras.ru>
---
 drivers/usb/gadget/udc/amd5536udc.c | 43 +++++++++++++++++--------------------
 1 file changed, 20 insertions(+), 23 deletions(-)

diff --git a/drivers/usb/gadget/udc/amd5536udc.c b/drivers/usb/gadget/udc/amd5536udc.c
index fdacddb18c00..175ca93fe5e2 100644
--- a/drivers/usb/gadget/udc/amd5536udc.c
+++ b/drivers/usb/gadget/udc/amd5536udc.c
@@ -3138,8 +3138,8 @@ static void udc_pci_remove(struct pci_dev *pdev)
 	writel(AMD_BIT(UDC_DEVCFG_SOFTRESET), &dev->regs->cfg);
 	if (dev->irq_registered)
 		free_irq(pdev->irq, dev);
-	if (dev->regs)
-		iounmap(dev->regs);
+	if (dev->virt_addr)
+		iounmap(dev->virt_addr);
 	if (dev->mem_region)
 		release_mem_region(pci_resource_start(pdev, 0),
 				pci_resource_len(pdev, 0));
@@ -3226,17 +3226,13 @@ static int udc_pci_probe(
 
 	/* init */
 	dev = kzalloc(sizeof(struct udc), GFP_KERNEL);
-	if (!dev) {
-		retval = -ENOMEM;
-		goto finished;
-	}
+	if (!dev)
+		return -ENOMEM;
 
 	/* pci setup */
 	if (pci_enable_device(pdev) < 0) {
-		kfree(dev);
-		dev = NULL;
 		retval = -ENODEV;
-		goto finished;
+		goto err_pcidev;
 	}
 	dev->active = 1;
 
@@ -3246,28 +3242,22 @@ static int udc_pci_probe(
 
 	if (!request_mem_region(resource, len, name)) {
 		dev_dbg(&pdev->dev, "pci device used already\n");
-		kfree(dev);
-		dev = NULL;
 		retval = -EBUSY;
-		goto finished;
+		goto err_memreg;
 	}
 	dev->mem_region = 1;
 
 	dev->virt_addr = ioremap_nocache(resource, len);
 	if (dev->virt_addr == NULL) {
 		dev_dbg(&pdev->dev, "start address cannot be mapped\n");
-		kfree(dev);
-		dev = NULL;
 		retval = -EFAULT;
-		goto finished;
+		goto err_ioremap;
 	}
 
 	if (!pdev->irq) {
 		dev_err(&pdev->dev, "irq not set\n");
-		kfree(dev);
-		dev = NULL;
 		retval = -ENODEV;
-		goto finished;
+		goto err_irq;
 	}
 
 	spin_lock_init(&dev->lock);
@@ -3283,10 +3273,8 @@ static int udc_pci_probe(
 
 	if (request_irq(pdev->irq, udc_irq, IRQF_SHARED, name, dev) != 0) {
 		dev_dbg(&pdev->dev, "request_irq(%d) fail\n", pdev->irq);
-		kfree(dev);
-		dev = NULL;
 		retval = -EBUSY;
-		goto finished;
+		goto err_irq;
 	}
 	dev->irq_registered = 1;
 
@@ -3314,8 +3302,17 @@ static int udc_pci_probe(
 		return 0;
 
 finished:
-	if (dev)
-		udc_pci_remove(pdev);
+	udc_pci_remove(pdev);
+	return retval;
+
+err_irq:
+	iounmap(dev->virt_addr);
+err_ioremap:
+	release_mem_region(resource, len);
+err_memreg:
+	pci_disable_device(pdev);
+err_pcidev:
+	kfree(dev);
 	return retval;
 }
 
-- 
1.9.1