[lvc-project] [PATCH] [media] mxl111sf: Check return value in mxl111sf_config_mpeg_in

[Artem Chernyshev]

Error check after mxl111sf_read_reg

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 4c66c9205c07 ("[media] dvb-usb: add ATSC support for the Hauppauge WinTV-Aero-M")
Signed-off-by: Artem Chernyshev <artem.chernyshev at red-soft.ru>
---
 drivers/media/usb/dvb-usb-v2/mxl111sf-phy.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf-phy.c b/drivers/media/usb/dvb-usb-v2/mxl111sf-phy.c
index 40b26712ba4c..ad1888514bd0 100644
--- a/drivers/media/usb/dvb-usb-v2/mxl111sf-phy.c
+++ b/drivers/media/usb/dvb-usb-v2/mxl111sf-phy.c
@@ -121,7 +121,8 @@ int mxl111sf_config_mpeg_in(struct mxl111sf_state *state,
 	mxl_fail(ret);
 
 	/* Configure MPEG Clock phase */
-	mxl111sf_read_reg(state, V6_MPEG_IN_CLK_INV_REG, &mode);
+	ret = mxl111sf_read_reg(state, V6_MPEG_IN_CLK_INV_REG, &mode);
+	mxl_fail(ret);
 
 	if (clock_phase == TSIF_NORMAL)
 		mode &= ~V6_INVERTED_CLK_PHASE;
-- 
2.30.3