[lvc-project] [PATCH v2 3/3] wifi: ath11k: miscellaneous spelling fixes

[Dmitry Antipov]

Correct spelling here and there as suggested by codespell.

Signed-off-by: Dmitry Antipov <dmantipov at yandex.ru>
---
v2: join the series
---
 drivers/net/wireless/ath/ath11k/hal.h | 6 +++---
 drivers/net/wireless/ath/ath11k/mac.c | 4 ++--
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/hal.h b/drivers/net/wireless/ath/ath11k/hal.h
index dc8bbe073017..601542410c75 100644
--- a/drivers/net/wireless/ath/ath11k/hal.h
+++ b/drivers/net/wireless/ath/ath11k/hal.h
@@ -700,7 +700,7 @@ enum hal_rx_buf_return_buf_manager {
 #define HAL_REO_CMD_FLG_UNBLK_RESOURCE		BIT(7)
 #define HAL_REO_CMD_FLG_UNBLK_CACHE		BIT(8)
 
-/* Should be matching with HAL_REO_UPD_RX_QUEUE_INFO0_UPD_* feilds */
+/* Should be matching with HAL_REO_UPD_RX_QUEUE_INFO0_UPD_* fields */
 #define HAL_REO_CMD_UPD0_RX_QUEUE_NUM		BIT(8)
 #define HAL_REO_CMD_UPD0_VLD			BIT(9)
 #define HAL_REO_CMD_UPD0_ALDC			BIT(10)
@@ -725,7 +725,7 @@ enum hal_rx_buf_return_buf_manager {
 #define HAL_REO_CMD_UPD0_PN_VALID		BIT(29)
 #define HAL_REO_CMD_UPD0_PN			BIT(30)
 
-/* Should be matching with HAL_REO_UPD_RX_QUEUE_INFO1_* feilds */
+/* Should be matching with HAL_REO_UPD_RX_QUEUE_INFO1_* fields */
 #define HAL_REO_CMD_UPD1_VLD			BIT(16)
 #define HAL_REO_CMD_UPD1_ALDC			GENMASK(18, 17)
 #define HAL_REO_CMD_UPD1_DIS_DUP_DETECTION	BIT(19)
@@ -741,7 +741,7 @@ enum hal_rx_buf_return_buf_manager {
 #define HAL_REO_CMD_UPD1_PN_HANDLE_ENABLE	BIT(30)
 #define HAL_REO_CMD_UPD1_IGNORE_AMPDU_FLG	BIT(31)
 
-/* Should be matching with HAL_REO_UPD_RX_QUEUE_INFO2_* feilds */
+/* Should be matching with HAL_REO_UPD_RX_QUEUE_INFO2_* fields */
 #define HAL_REO_CMD_UPD2_SVLD			BIT(10)
 #define HAL_REO_CMD_UPD2_SSN			GENMASK(22, 11)
 #define HAL_REO_CMD_UPD2_SEQ_2K_ERR		BIT(23)
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index e6acbff06749..7a75de8aec2b 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -2230,7 +2230,7 @@ static void ath11k_peer_assoc_h_vht(struct ath11k *ar,
 		__le16_to_cpu(vht_cap->vht_mcs.tx_mcs_map), vht_mcs_mask);
 
 	/* In IPQ8074 platform, VHT mcs rate 10 and 11 is enabled by default.
-	 * VHT mcs rate 10 and 11 is not suppoerted in 11ac standard.
+	 * VHT mcs rate 10 and 11 is not supported in 11ac standard.
 	 * so explicitly disable the VHT MCS rate 10 and 11 in 11ac mode.
 	 */
 	arg->tx_mcs_set &= ~IEEE80211_VHT_MCS_SUPPORT_0_11_MASK;
@@ -6952,7 +6952,7 @@ static void ath11k_mac_op_remove_interface(struct ieee80211_hw *hw,
 	/* Recalc txpower for remaining vdev */
 	ath11k_mac_txpower_recalc(ar);
 
-	/* TODO: recal traffic pause state based on the available vdevs */
+	/* TODO: recalc traffic pause state based on the available vdevs */
 
 	mutex_unlock(&ar->conf_mutex);
 }
-- 
2.47.0