[lvc-project] [PATCH rtw-next v4 09/10] wifi: rtw89: provide TX reports for management frames

[Fedor Pchelkin]

In order to provide TX reports for the management queue rtw89 should
configure the firmware.  Do this with SET_CMC_TBL_MGQ_RPT_EN() for the
WiFi6 chips and with CCTLINFO_G7_W0_MGQ_RPT_EN flag for the WiFi7 ones.

Suggested-by: Bitterblue Smith <rtl8821cerfe2 at gmail.com>
Signed-off-by: Fedor Pchelkin <pchelkin at ispras.ru>
Acked-by: Ping-Ke Shih <pkshih at realtek.com>
---
 drivers/net/wireless/realtek/rtw89/fw.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/realtek/rtw89/fw.c b/drivers/net/wireless/realtek/rtw89/fw.c
index cb431c8a65ac..96f0463e66d6 100644
--- a/drivers/net/wireless/realtek/rtw89/fw.c
+++ b/drivers/net/wireless/realtek/rtw89/fw.c
@@ -3165,6 +3165,7 @@ int rtw89_fw_h2c_default_cmac_tbl(struct rtw89_dev *rtwdev,
 		SET_CMC_TBL_ANTSEL_C(skb->data, 0);
 		SET_CMC_TBL_ANTSEL_D(skb->data, 0);
 	}
+	SET_CMC_TBL_MGQ_RPT_EN(skb->data, rtwdev->hci.tx_rpt_enabled);
 	SET_CMC_TBL_DOPPLER_CTRL(skb->data, 0);
 	SET_CMC_TBL_TXPWR_TOLERENCE(skb->data, 0);
 	if (rtwvif_link->net_type == RTW89_NET_TYPE_AP_MODE)
@@ -3210,7 +3211,8 @@ int rtw89_fw_h2c_default_cmac_tbl_g7(struct rtw89_dev *rtwdev,
 	h2c->c0 = le32_encode_bits(mac_id, CCTLINFO_G7_C0_MACID) |
 		  le32_encode_bits(1, CCTLINFO_G7_C0_OP);
 
-	h2c->w0 = le32_encode_bits(4, CCTLINFO_G7_W0_DATARATE);
+	h2c->w0 = le32_encode_bits(4, CCTLINFO_G7_W0_DATARATE) |
+		  le32_encode_bits(rtwdev->hci.tx_rpt_enabled, CCTLINFO_G7_W0_MGQ_RPT_EN);
 	h2c->m0 = cpu_to_le32(CCTLINFO_G7_W0_ALL);
 
 	h2c->w1 = le32_encode_bits(4, CCTLINFO_G7_W1_DATA_RTY_LOWEST_RATE) |
-- 
2.51.0