[lvc-project] [PATCH net-next v2 1/2] e1000: limit endianness conversion to boundary words

[Agalakov Daniil]

[Why]
In e1000_set_eeprom(), the eeprom_buff is allocated to hold a range of
words. However, only the boundary words (the first and the last) are
populated from the EEPROM if the write request is not word-aligned.
The words in the middle of the buffer remain uninitialized because they
are intended to be completely overwritten by the new data via memcpy().

The previous implementation had a loop that performed le16_to_cpus()
on the entire buffer. This resulted in endianness conversion being
performed on uninitialized memory for all interior words.

Fix this by converting the endianness only for the boundary words
immediately after they are successfully read from the EEPROM.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Co-developed-by: Iskhakov Daniil <dish at amicon.ru>
Signed-off-by: Iskhakov Daniil <dish at amicon.ru>
Signed-off-by: Agalakov Daniil <ade at amicon.ru>
---
v2:
 - Split from the original bugfix series and targeted at 'net-text'.
 - Removed the Fixes: tag; limiting the conversion scope is an
   improvement to avoid unnecessary processing of uninitialized memory.
 - Improved commit description for clarity.

 drivers/net/ethernet/intel/e1000/e1000_ethtool.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
index ab232b3fbbd0..38b1f91823ef 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
@@ -496,6 +496,10 @@ static int e1000_set_eeprom(struct net_device *netdev,
 		 */
 		ret_val = e1000_read_eeprom(hw, first_word, 1,
 					    &eeprom_buff[0]);
+
+		/* Device's eeprom is always little-endian, word addressable */
+		le16_to_cpus(&eeprom_buff[0]);
+
 		ptr++;
 	}
 	if (((eeprom->offset + eeprom->len) & 1) && (ret_val == 0)) {
@@ -504,11 +508,10 @@ static int e1000_set_eeprom(struct net_device *netdev,
 		 */
 		ret_val = e1000_read_eeprom(hw, last_word, 1,
 					    &eeprom_buff[last_word - first_word]);
-	}
 
-	/* Device's eeprom is always little-endian, word addressable */
-	for (i = 0; i < last_word - first_word + 1; i++)
-		le16_to_cpus(&eeprom_buff[i]);
+		/* Device's eeprom is always little-endian, word addressable */
+		le16_to_cpus(&eeprom_buff[last_word - first_word]);
+	}
 
 	memcpy(ptr, bytes, eeprom->len);
 
-- 
2.51.0